|
| HOME > > Solar PV Products > Charge Controller >Solarix PRS 1010/1515/2020/3030 |
|
| |
The simplicity and high performance of the new Steca Solarix PRS solar charge controller make it particularly attractive. At the same time, it offers a modern design and a convenient display, all at an extremely attractive price. |
|
| |
Several LEDs in various colours emulate a tank display, which gives information on the charge status of the battery. Here, Steca’s latest algorithms are employed in order to guarantee optimal battery maintenance. The Solarix PRS charge controllers are equipped with an electronic fuse, thus ensuring the optimal protection. They operate on the serial principle, and separate the solar module from the battery in order to protect it against overcharging. |
|
| |
The Solarix PRS charge controllers are universal charge controllers, which means they can be used with lead-acid batteries or gel batteries without the need for complex configuration settings. |
|
| |
For larger projects, the charge controllers can also be equipped with special functions. These include the night light function, and selectable charging plateau and deepdischarge protection voltages. |
|
|
|
|
| |
|
Functions
• Low-loss serial controller
• PWM-controlled constant-voltage charging
• Battery charging with automatic charging
mode selection (float, boost, equal)
• Recognises and carries out a maintenance charge
(boost charge every 30 days if idle)
• Automatically adjusts to the voltage level 12 V/24 V
• Current-dependent load deactivation
• Automatic load reactivation
• Temperature compensation
• Grounding on the plus side
• Integrated self test (start voltage 17.0 V)
• Made in Germany (development and production) |
|
| |
|
Display
• 4 separate LEDs to display the battery charge status
• LEDs (red/green) to display the function status |
|
| |
|
Electronic protection functions
• Battery-overload protection (HVD)
• Deep-discharge protection (LVD)
• Automatic electronic fuse
• Reverse-polarity protection at module input,
of the load and the battery connection
• Reverse-polarity protection of the module
• Short-circuit protection of the load and the module
• Good electromagnetic compatibility
• Idling protection in case no battery is connected
• Prevention of back current into the module
• Integrated temperature compensation of the end-ofcharge
voltage (0 °C to +50 °C, factor -4mV/K/cell) |
|
| |
|
Certificates
• Manufactured by Steca in Germany under the
standards ISO 9001 and 14001
• CE compliant |
|
| |
 |
|
 |
|
|
|
|
